Thursday, February 25, 2010

Home Theater In Wall Surround Sound Speakers

Elan MP-650W
Elan Home Systems is a major supplier of distributed audio and home automation components for custom installation. They also manufacture a line of in-wall loudspeakers; featured here is the MP-650W, with a 6.5-inch woven-glass-fiber woofer and 0.75-inch aluminum-magnesium composite dome tweeter. The speaker frame, or basket, is made of the same glass-fiber compound.

The mounting system uses six clamps to secure the mounting bracket and speaker baffle to the wall, or you can attach the mounting bracket directly to wall studs using drywall screws. The baffle is contoured around the woofer and tweeter to minimize edge diffraction. The speaker baffle also has a knock-out plug for an IR receiver. Tone controls permit bass and treble adjustment of +/–3 dB, and the MP-650W has a pivoting tweeter to direct high frequencies toward the listening area.
Aesthetically, the MP-650W has a tall, narrow shape with a slim profile when installed in the wall. You can paint the grille and frame to match your interior décor.
The Elan has a balanced sound quality, with excellent midrange presence and very detailed high-end response. My newly acquired DVD-Audio version of Fleetwood Mac's Rumours revealed a rather punchy-sounding midbass with good dynamic range, and the speaker reproduced all of the detail in Acoustic Alchemy's "One for the Road" with excellent clarity. I especially enjoyed Jane Monheit's vocals in the Session #55 DVD-Audio, which demonstrated the MP-650W's exceptional imaging and soundstaging capabilities, most likely due in part to the pivoting tweeter.

Features:
Tweeter (size in inches, type): 0.75, aluminum-magnesium dome
Woofer (size in inches, type): 6.5, woven glass fiber
Cutout Dimensions (inches): 7.125 wide by 12.25 high
Mounting Depth (inches): 3.813
Available Finishes: white (paintable)
Price: $550/pair
Ratings: Elan MP-650W
Build Quality: 92
Value: 93
Features: 93
Performance: 92
Ergonomics: 94
Overall Rating: 93
General information
MP-650W In-Wall Speaker, $550/pair
Elan Home Systems
(859) 269-7760
www.elanhomesystems.com
Dealer Locator Code ELA



Parasound C 265
In addition to manufacturing high-end audio components, Parasound offers in-wall and in-ceiling speakers for the custom-install market. The C 265 falls in the middle of their product assortment and has a 6.5-inch Kevlar cone woofer and a 1-inch aluminum dome tweeter.
Kevlar is an ultra-strong material (also used in bulletproof vests) that provides two important advantages in woofer design: It's rigid and lightweight. The dome tweeter uses Ferrofluid, a combination of iron particles and lubricant that enhances voice-coil heat conduction and dampens peaks in the tweeter's impedance.
The C-265 uses a mounting system with six dogleg clamps to secure the speaker to the wall, and the baffle has a knock-out plug for an IR receiver. There's also a three-position treble control that lets you adjust the treble +/–3 dB. The speaker terminal is a spring-loaded push-type terminal that accepts up to 10-gauge wire. As with the other speakers featured here, you can paint the speaker baffle and grille.
The Parasound had a smooth, natural, and well-balanced sound quality with a very detailed and delicate high end. Vocals, such as those of Clydene Jackson Edwards in "Come on In," were liquid and lush. The speaker's midrange qualities were excellent, especially the piano in Adam Makowicz's "Ab Elegy." There was plenty of mid- and low-bass response in Steely Dan's Everything Must Go DVD-Audio, even without a subwoofer.
Overall, the C 265 was pleasant to listen to. It also handled a lot of power without being overdriven. This is a great-sounding speaker and a real value at its price point.

At A Glance: Parasound C 265
Features:
Tweeter (size in inches, type): 1, aluminum dome
Woofer (size in inches, type): 6.5, Kevlar cone
Cutout Dimensions (inches): 7.375 wide by 10.75 high
Mounting Depth (inches): 3.25
Available Finishes: white (paintable)
Price: $435/pair
Ratings: Parasound C 265
Build Quality: 92
Value: 96
Features: 93
Performance: 95
Ergonomics: 92
Overall Rating: 94
General information
C 265 In-Wall Speaker, $435/pair
Parasound Products
(415) 397-7100
www.parasound.com
Dealer Locator Code PAR



Phase Technology CI-60
The Phase Technology brand was started in 1978 after the company spent many years building loudspeakers for other manufacturers. They now build floorstanding, bookshelf, in-wall, and in-ceiling speakers, as well as in-wall and floorstanding subs. The CI-60 comes from their Custom Installation Series of in-wall speakers.
The CI-60 features a 6.5-inch woofer and 1-inch tweeter that have some unusual features. Phase Tech calls the woofer design a Solid Piston Driver with RPF (which stands for Rigid Polymer Foam); the driver has a flat surface that outputs all frequencies from the same plane simultaneously. The woofer also uses a large 1.5-inch voice coil to increase power-handling capability. The soft-dome pivoting tweeter is adjustable to enable the listener to aim it right at the listening area. Phase Tech employs a crossover technology that they call Absolute Phase, which ensures that the drivers are acoustically and electrically in-phase. The company also strives to create in-walls with good vertical dispersion.
The two-piece installation system consists of a separate mounting bracket and speaker assembly, which makes installation a little easier. According to Phase Tech, it also permits upgrading to a better model in the future because all of the speakers in their line use the same mounting bracket. You can also attach the speakers directly to studs with a slotted post on the mounting frame. The back of the woofer is covered with cloth to prevent drywall dust from entering the speaker's voice coil, and the baffle features a knock-out plug for an IR receiver.
I would describe the CI-60's sound as dynamic and musical. Pat Coil's "Sierra Highways" sounded rich and full at all volume levels. The piano in Airto Moreira and the Gods of Jazz's "Nevermind" jumped out of the speaker and into the room. Bass was full enough without a subwoofer, and mids and highs were pleasing and well balanced. Overall, this is a great speaker with a pleasing sound quality that was easy to listen to.

At A Glance: Phase Technology CI-60
Features:
Tweeter (size in inches, type): 1, soft dome
Woofer (size in inches, type): 6.5, Solid Piston Driver with RPF
Cutout Dimensions (inches): 7.5 wide by 10.75 high
Mounting Depth (inches): 3.5
Available Finishes: white (paintable)
Price: $600/pair
Ratings: Phase Technology CI-60
Build Quality: 90
Value: 95
Features: 93
Performance: 95
Ergonomics: 94
Overall Rating: 94
General information
CI-60 In-Wall Speaker, $600/pair
Phase Technology
(888) 742-7385
www.phasetech.com
Dealer Locator Code PHA



Streamline Home Theaters
93 Whiting St.
Plainville, CT 06062
1-888-841-2815

Saturday, February 20, 2010

Home Theater Man Cave In Connecticut















The Southington Connecticut Man Cave Home Theater!

This basement home theater is a sight to see! Imagine watching a movie on the big screen at your local movie theater, then multiply that experience by at least 500% and that's what this personal home theater produces. The crystal clear 103 inch 1080P picture combined with a 910 Watt 7.1 surround sound system fine tuned for this room with seven large leather automatic reclining seats and theater style dimming lights should say it all but words and pictures don't do this room justice. This theater can comfortably seat up to seven guests all with a perfect non-obstructive view of the entire screen. This theater room is acoustically perfect in every way; the sound produced by seven premium KEF speakers delivers a full crisp spectrum of sound throughout the entire room that doesn't bounce around. Every detail throughout the overall design of this room, including the carpet and sheetrock used was designed to maintain optimal sound quality. Whether it's being used for viewing a movie with the family or entertaining friends during a sporting event, this custom home theater system is amazing in every way!


About the equipment

JVC D-ILA Front Projector - The DLA-HD100 brings Full HD to your home with the industry's highest native contrast ratio. The "native" means that it does not rely on an iris mechanism to maximize contrast depending on the average brightness of one scene. This technical sleight of hand employed on other projectors, effectively changes overall luminosity, so that blacks are slightly bleached in bright scenes, while light colors appear duller in dark scenes.

1080P Video Output
30,000:1 Contrast Ratio
Projection Size 60" - 200"

KEF KHT5000 Surround Sound Speakers - The cool minimalism of these slender cast aluminum column speakers belies the sophistication of the technology that makes them sound so authoritative. Whether you’re watching a film or chilling out to a few tracks, they sound as clean as they look. 100W X 7 Total Speaker Power = 700W

KEF HTB2BL - The HTB2BL is the first subwoofer at this price level that you won't want to hide away out of sight. A stylish, small and inert enclosure is shaped to eliminate internal standing waves and surrounds a 250 millimeter (10 inch) bass driver and matching passive bass radiator. The HTB2BL also features an ultra-reliable high efficiency 250 watt class D amplifier which can play very loud and very clean.


250W x 2 Total Sub Power = 500W

Total Home Theater Cost = $50,000




Thursday, February 4, 2010

About Plasma burn in And How To Avoid It

So you've got your eye on that new plasma television. But you occasionally hear talk of this thing called "burn in". You've got a friend who's telling you how he'd never buy a plasma because it can get burnt in in just a few hours. But how can that be? Everybody's talking about them, and they're selling like crazy. So what's going on?

Before I explain what plasma burn in really is, lets take a look at what makes plasma televisions tick.


How Do Plasma Televisions Work?

Plasma screens are made up of hundreds of thousands of tiny cells called pixels. Each pixel is composed of a red, blue, and green subpixel that's coated with a special phosphor material.

Plasma diagram

Each pixel is also filled with a mixture of neon and xenon gas. When an electrical current is applied to each pixel, the gas glows and emits ultraviolet light. You and I can't see the UV light but it reacts with the phosphor, and the phosphor emits a particular color; red, blue, or green. The image displayed on the screen is a combination of all those pixels glowing in a particular pattern.

How Does Burn In Happen?

The problem with plasma screens is that the phosphors used in each pixel don't last forever. When they're excited to emit light, they actually get dimmer. The more a plasma screen operates, the dimmer it gets because the phosphors are slowly burning away. Sounds like quite the grim end for such an expensive television but don't worry; it generally takes somewhere around 50,000 hours of operation or more for the screen to drop to half its original brightness.

Plasma burn in happens when the phosphors burn at a particular intensity for too long. The random nature of TV and movie content causes the phosphors across the entire screen to burn at the same rate. But if the screen is displaying a static image for an extended period of time, those particular phosphors will wear out faster than the phosphors in neighboring pixels and a faint image will remain behind.

This is a serious problem for plasma owners who are avid video gamers. The head up display (score indicators, etc.) of many games simply doesn't move and the danger of burn in here is quite real. Others have reported that those annoying network logos you're forced to endure while watching your favorite TV show can get burned into the screen as well.

There have been a few lawsuits against television networks and even Sony to try and eliminate the network logos. So far, these lawsuits seem to be working as more and more networks are using semi-transparent network logos. They're also starting to move them around to different corners of the screen.

How Can I Prevent It?

Now there are two camps in the plasma burn in debate. Those who believe that plasma screen's can develop burn in after just a few short hours of TV viewing. The other camp believe burn in just no longer happens in high-quality plasma's that have been maintained properly.

Maintained properly? Say that again? Most plasma manufacturers recommend you "break in" a new plasma television by keeping its brightness and contrast below a certain level for the first 100 hours or so of TV viewing. They also recommend you set the aspect ratio so it completely fills the screen for those first 100 hours.

The first 100 hours or so are indeed the most critical for any plasma screen. During this period, you should set your television to stretch the video image to fill the entire screen. Avoid playing video games for more than an hour or so.

The brightness and contrast of any plasma also has a big impact on the risk of burn-in. Most sets come from the factory with these settings set way too high, an attempt to get them to look better than the competition in the showroom no doubt.

When you setup your new plasma, always turn down these settings. Better yet, use a video calibration disk like Video Essentials or Avia to configure your screen's colors. You'll have to lower your brightness and contrast to get your screen colors just right anyway.

Many plasmas sold today use anti-burn technologies like pixel-shifting, orbiting, screen/white wash, and screensavers.

These are good suggestions to follow and it appears that many people who've reported plasma burn in problems didn't follow these common sense precautions.

It has been reported by several manufacturers and analysts that sales of plasma's have been surging throughout 2006. With sizes increasing and prices dropping, how bad can the burn in problem really be when so many people are enjoying them?

Exactly.


For Plasma TV Installation Service in Connecticut click the link and a specialist can help properly install your TV at a great price.